Dream LED Striplight 24V
The Mesmerize Dream LED Striplight is a 24V running-light strip that sends warm 2700K light flowing, chasing and pulsing along its length. Choose from 23 lighting effects, 10 speed levels and 14 brightness levels on the RF remote, in an IP20 strip for indoors or a silicone-coated IP67 strip for outdoors. Pair it with the Dream Striplight Controller and Dream Striplight RF Remote to bring the effects to life.
Description
- Running-light effects: 23 lighting effects that make the light flow, chase and pulse along the strip
- Full control of the mood: 10 speed levels and 14 brightness levels from the RF remote
- Warm white: 2700K light that flatters homes, restaurants and retail spaces
- Bright and efficient: 10W per metre for 900 lumens per metre
- Safe low voltage: runs on DC24V from a constant-voltage LED driver
- Indoor or outdoor: IP20 for dry indoor areas, or IP67 with a silicone coating for patios, facades and damp areas
- Cut to fit: cutting marks every 125mm so the strip matches the length of the run
- Slim profile: a 10mm wide strip that tucks into coves, shelves, bulkheads and aluminium profiles
- Even spread: 120° beam angle for smooth light with no harsh hot spots
- True colours: colour rendering index of 83+
- Built to last: 25 000 hour lifespan, working from -10°C to 45°C
- Compliance: EMC, RoHS and IEC tested, with an LOA
- Peace of mind: backed by a 2-year warranty
Light that moves
Most striplights give you a line of light. Dream gives you a line of light that moves. Run it slowly along a ceiling cove for a calm, drifting glow, or speed it up to draw the eye to a bar front, a shop window, a sign or a building edge. It is made for home exteriors, restaurants, retail spaces and entertainment spaces where the lighting is part of the experience.
What you need for a Dream installation
The strip needs a Dream Striplight Controller to run the effects and a Dream Striplight RF Remote to choose them, plus a 24V DC driver sized for the length of the run. For bigger layouts, the Dream 1-to-8 Amplifier shares one signal across up to eight runs so they all move in step, and the 3-pin connectors (male and female) let you join lengths and plug runs in without re-soldering. Accessories and drivers are sold separately.
IP20 or IP67?
Choose IP20 for dry indoor areas such as coves, shelving, bulkheads and signage boxes. Choose IP67 where the strip may meet moisture: patios, pergolas, facades, bathrooms and kitchens. When IP67 strip is cut or joined, the joint and the cut end must be re-sealed to keep the rating.
Tip: The strip uses three wires (red +24V, white ground, green signal) and the effect runs in the direction of the arrow printed on the strip, so plan where the controller sits before you cut. Installation should be done by a qualified electrician. Send us the length of your run and we will help you choose the right driver and accessories.
Additional information
| Ingress Protection | IP20, IP67 |
|---|---|
| Input Voltage | DC24V |
| Wattage | 10W/m |
| Effective Lumen | 900 lm/m |
| Colour Temperature | 2700K |
| Colour Rendering Index | 83+ |
| Beam Angle | 120° |
| Dimmable | Yes via remote |
| Lifespan | 25000 Hours |
| Warranty | 2 Years |
| Lighting Effects | 23 effects, 10 speed levels, 14 brightness levels |
| Control | Dream controller with RF remote (sold separately) |
| FPCB Width | 10mm |
| Cutting Interval | 125mm |
| Operating Temperature | -10°C to 45°C |
